Seagull #REC2 – let’s get it running !

Below you will find support for Seagull #REC2. These sections only cover basic parts from the full manual !

ArrowDownNEW Click on a subject below …

Refer to the table below for complete list of functions available on specified channels:

Connect the servo cable by following the colored polarity markings on Seagull #REC2 and connect the other end of the servo cable to your Receiver / Flight Controller, with the correct polarity.

Please refer to the manual of your specific R/C radio system or Flight Controller to find out more about how to connect accessories and which ports to utilize.

If connecting to a Flight Controller – ensure that the there is power throughout rails as most of the controllers by default do not output any. It is recommended to use external supply such as BEC or other power source – do not exceed manufacturers specified maximum input voltages for the systems in use.

Mission Planner

If you wish to trigger Seagull #REC2 from a Flight Controller, setting it up in Mission Planner is also straight forward.
Start Mission Planner and follow the steps below:

DJI Assistant 2

#REC2 can be controller via DJI A3 flight controller. It is very easy to setup automated flight photo capturing via DJI Assistant 2 software. For controlling more features of #REC2 an expansion kit is required, since by default it is not possible to utilize other F ports and bind them to the channels of LB transmitters.

Below is an example of integrating #REC2 and configuring via DJI Assistant 2:

To determine the current state of Seagull #REC2 – simply read the output of the LED and reference it to the table below:

Still in doubt ?

Fly to our Contact page with your question
– and we will get back to you ASAP !